Wilson Electronics MAXX 2 Series Especificaciones descargar pdf (Pagina 11)

Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660

or email: [email protected]. Mon.- Fri. Hours: 7 am to 6 pm MST.

The Signal Booster is equipped with four indicator lights for each Band (700 –

Band 12,13,17/800 – Band 5/1900 – Band 2/1700/2100- Band 4). The lights will

do one of the following 3 things:

1. GREEN

The indicator lights on the Signal Booster will be green if the unit is powered

up and working properly.

2. ORANGE

The Signal Booster is experiencing receiver overload. The Signal Booster has

protection circuits to prevent the disruption of cell towers. If one or more of

the lights are orange, this indicates that the Signal Booster has automatically

reduced the gain due to close proximity to a cell tower. To view how much the

gain has been reduced, turn the knob down until the light turns green. This

is the Actual Gain that the Signal Booster is operating on. Since the Signal

Booster adjusts gain automatically, there is no need to turn the gain down. If

Understanding the Signal Booster Lights and

Troubleshooting

Note: Reset the Signal Booster by disconnecting and reconnecting the power

supply from the Signal Booster.

Note: All red lights must be resolved before orange lights.

Figure 1

Figure 2

Signal Booster

Outdoor

Antenna

Outdoor

Antenna

Inside Panel

Antenna

CORRECT INSTALLATION

Point antennas away from each other

INCORRECT INSTALLATION

Never point antennas toward each other

Inside Panel

Antenna

Signal Booster

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Sin comentarios

Wilson Electronics MAXX 2 Series Especificaciones Pagina 11