Wilson Electronics 811201 Guía de instalación descargar pdf (Pagina 4)

Contact Wilson Electronics Tech Support with any questions at (507)282-8484

Or email: [email protected] Hours: 7am to 6pm MST.

The outside antenna must be installed

vertically. Signal performance will be

degraded if the antenna is not vertical.

Run the antenna cable through the door to

the Signal Booster.

For a more professional looking installation,

run the antenna cable under the door seal.

Carefully pull down the door seal. Run the

cable through the seal and push the seal

back into place. This prevents constant

wear and tear on the cable as the door

opens and closes.

The antenna cable is small enough to easily

tuck under the door seal or plastic molding.

Optional Magnet-

Mount Antenna

Shown

Carefully

Pull Down

Door Seal

Run Cable

Under

Seal

Tuck Cable

Under Seal

Installing a Wilson Outside Antenna

To receive the best cell signal, select a location in the center of the vehicle’s roof at least 12

inches away from any other antennas and free of obstructions.

Follow the specic antenna installation instructions included with the outside antenna (sold

separately).

NOTE: See RF Safety Warnings (p. 9)

In-Vehicle

1 2 3 4 5 6 7 8 9 ... 23 24

Sin comentarios

Wilson Electronics 811201 Guía de instalación Pagina 4